Manufacturing Equipment Cleaning
In-place cleaning of presses, moulds, robots and production cells — no tear-down required.
In-place cleaning of presses, moulds, robots and production cells — no tear-down required.
Injection moulds, presses, robots and CNC machinery accumulate process residues, gas vents and cooling-channel fouling that compromise quality. Tear-down for cleaning costs days of production. Dry ice blasting cleans most equipment in-place, including hot moulds, without dismantling.
AI/photography placeholder. Drop in real before/after imagery here.
What you can expect
- Plastics injection moulds
- Press tooling
- Robot end-effectors & weld guns
- CNC fixtures
- Composites layup tools
Why dry ice for manufacturing equipment cleaning
Hot-mould cleaning
Moulds cleaned at temperature, ready to run again immediately.
No abrasive damage
Mould surfaces, polish and texture preserved.
Robot cells in place
End-effectors, fixtures and weld jigs cleaned without removal.
Less rejected product
Cleaner surfaces = fewer venting issues, less flash, fewer rejects.
How a typical manufacturing equipment cleaning job runs
- 1
Cell mapping
Identify what to clean per shift — moulds, presses, fixtures.
- 2
Phased blast
Cleaning sequenced around production; HEPA capture where required.
- 3
Resume
Equipment back in service immediately, often during the same maintenance window.
Surfaces & limits
Where this service works well — and the situations we'll flag for repair instead of cleaning.
- Hardened tool steel
- Aluminium tooling
- Polished mould surfaces
- Robotics & fixturing
- Conveyors
- Tooling with critical surface coatings under review
Typical price for manufacturing equipment cleaning
Production lines, marine vessels, restoration zones, multi-day commercial work.
Final price depends on condition, scope and travel. Use the calculator for a postcode-specific estimate.
Get exact estimateService-specific FAQs
Can you clean a hot mould?
Yes. We work routinely at production temperatures, returning the mould to service immediately after cleaning.
Will it damage polished mould surfaces?
No. Pellets are non-abrasive and preserve mirror finishes when correct pressures are used.
Related services
Food Production Cleaning
HACCP-aligned, food-grade cleaning of conveyors, ovens, mixers and packaging lines.
Electrical Equipment Cleaning
Clean energised switchgear, motors and panels without water, solvent or shutdown.
Print & Packaging Cleaning
Press rollers, ink trays, anilox cells and packaging lines cleaned in-place — no solvent baths.
Ready for a manufacturing equipment cleaning quote?
Open the calculator for an instant range, or send us a quick brief and we'll come back within 24 hours with a fixed quote.
Or talk to us directly
- 1300 000 000
- hello@dryiceblasters.com.au
- Mon–Fri 7am–6pm · Sat 8am–2pm · Sun by appointment